It’s simple to ask: Who needs a fancy headboard when you can make a more affordable one that is just as elegant?
This How-To will show you how to make rustic headboards for queen-sized beds without breaking the bank.
It is really all about cost.
What You’ll Need
- 2 pcs. 2 pcs.
- 3 pcs. 3 cmx25cm x1.8m lumber
- 3 pcs. 3 cmx10cm x2.4m lumber
- Hammer
- Sanding block
- Finishing nails (1/10 cm)
- (2
- Wood stain
- Paint brush or rag
Step 1: Measure The Lumber And Cut It
Measure each piece of lumber into the following dimensions:
- Two pieces measuring 142 cm in length from the 5 cmx10cms
- Three pieces measuring 157cm in length from the 3 cmx25cms
- From the first 3 cmx10cm, one 160 cm long piece
- From the second, three cmx10cm.
- Two 20-piece pieces starting at the third 3 cmx10cm
These measurements may not work for you. You can find other sizes in the video.
Use your miter saw to cut the lumber.
Step 2: Beat The Boards
The wood should appear a bit distressed, just like other rustic projects. Use your hammer to beat each piece of wood, giving it small cracks. You should be careful not to strike the boards too hard. They could be damaged. A heavy wrench can be used for this purpose, but any tool that can break things will work.
Step 3: Sand All Boards
Use the sanding blocks to go through all of the boards.
Step 4: Arrange Three Pieces Measuring 3 Cmx25cm X 157 Cm In Length
Place the three 3 cmx25cm long pieces on the floor. Place them horizontally with one board in front of the other. The boards should be arranged together to form a large rectangular headboard.
Step 5: Place The Top Two Pieces Measuring 3 Cmx10cm X 157cm Long
Take the three cmx10 cm x157cm boards and place them at the top and bottom of the headboard. These are the first pieces of the frame. Make sure they are flush with 3 cmx25 cms
Finish nails are used to secure each 3 cmx10cm x157cm piece.
Step 6: Place 20 Pieces Of 3/10 Cm On Both Sides Of The Headboard
Place the 3 cmx25cms together. To eliminate any gaps between the headboard and the sides, tighten the pieces. Finish the frame by placing the 20 cm pieces of 20 3/10 cm on each side. Finish everything by nailing it.
You must attach all 3 cmx25 cms to your frame, particularly the middle.
Step 7: Position The Headboard Legs
It’s time to give it legs. Flip the headboard. Place the two pieces measuring 142 cm in length, 5 cmx10cm each, flush against the frames. Attach them with screws.
Step 8: Place The 3 Cmx10cm X160cm Board At The Top
Grab the 160 cm length piece measuring 3 cmx10cm and place it on top of the headboard.
It should be possible to
Step 9: Apply The Wood Stain
Finally, give your wood stain that rustic look. This part can be done with a brush or an old cloth.
Allow the headboard to dry for several hours. The headboard is now ready to add rustic country charm to your bedroom.
The Rehab Life created this DIY project. You can watch the full video to learn more about this tutorial.
