Troy Bilt Zero-Turn Mower Problems + Troubleshooting Tips
Share it
LinkedIn WhatsApp
It is tiring to manually rake and cut the grass in your yard. Troy Bilts zero turn mowers make it easy to do all of this, even on larger areas.
There will be problems in the end. Our professionals have collected common Troy Bilt zero turn mower problems and solutions.
Issue 1: The Mower Won’t Start
Like a John Deere mower, a Troy Bilt mower will not start if it has an electrical problem, an airflow obstruction or an empty tank. You could also blame the ignition switch, battery problems, or seat safety switches.
If the tank is empty, check it and top it off. Troy Bilt dealers or professional landscapers should inspect your lawn mower for any technical problems, such as faulty ignition switches and wires.
Issue #2: Then It Starts
Your high-quality Troy Bilt mower suddenly stops working after it starts. This could be due to an issue in the spark plug, engine oil or air filter.
Replace worn out spark plugs. Professional landscapers suggest that you inspect your equipment for maintenance.
Issue #3: Mower Stops While Mowing
YourTroy Bilt mower may stop mid-mowing if it is overheating. If there is a problem with your mower’s carburetor or fuel tank, it can also cause the mower to stop.
Before you start the mower, allow the engine to cool off. Clean the filter and inspect the fuel tank to make sure there are no blockages.
Issue #4: Hydrostatic Transmission Problems
Hydrostatic transmissions allow you to enjoy a smooth ride while mowing. However, hydrostatic transmission fluids can become contaminated over time and cause transmission problems.
Hydrostatic transmission fluid needs to be changed if your mower is having difficulty steering or moving slowly. According to our professional landscapers, the transmission fluid should be changed every 50 hours or once a calendar year.
Issue #5: Mower Can’t Drive Correctly
Uneven tire pressures can cause the vehicle’s pull to be one-way, while uneven terrain could lead it to take a wrong turn. It could also be caused by a loose part in the system.
Professional landscapers suggest that you check your tires regularly for proper pressure. Check for worn gears and bushings to ensure that the tires are not driving erratically.
Issue #6: Mower Won’t Move
This issue is common in Troy Bilt zero turn mowers and other John Deere products. It’s something that novice landscapers often experience. This issue is often caused by worn-out components of the mower, an engaged drive release lever, or insufficient hydraulic oil.
For instructions on how to remove the drive release lever, refer to the manual. Maintaining a mower’s efficiency means replacing worn components.
Issue #7: Mower Shakes & Vibrates
A dull blade is usually responsible for vibrations and shaking. These problems can also be caused by a damaged or loose engine flywheel.
Stop using the mower if it is shaking. You can sharpen the blade or search for a replacement.
Issue #8: Uneven Cutting
Check the pressure of your tires if your riding mower doesn’t make consistent cuts. Inconsistent terrain can lead to inconsistent cutting, as well as dull or damaged blades.
Check that the tire pressure is equal on all four tires. You should inspect the blades for any damage or dullness and have them regularly sharpened or replaced.
Issue #9: Gas Leaking
Gas leaks should be addressed immediately, especially if there is excessive oil in the mower tank. Loose fuel lines and a damaged fuel tank are the most common causes of gas leakage.
Professional landscapers suggest tightening loose fuel lines and inspecting for cracks or holes in the fuel tank. To avoid further damage, it is recommended that experts repair any significant damage.
Issue #10: Mower Smoking
Smokey mowers could be caused by an oil leak, over-filling of the oil tank, or damaged piston rings and valves.
You should stop using your mower immediately. Your mower can be severely damaged if you overfill the oil tank. To avoid any further problems, you should immediately remove the lawnmower gas.
FAQ
Why is my Troy Bilt lawnmower not running?
Your Troy Bilt mower may not be running if it has a problem with the spark plug, fuel or air filters. You may also need to clean the carburetor or fix the fuel tank.
Is the fuse on a Troy Bilt riding mower dead?
The fuse for a Troy Bilt riding mower can be found under the hood near the battery.
Conclusion
Regular maintenance and repairs can help prevent Troy Bilt zero turn mower problems. Expert assistance is available for technical problems. Our experienced landscapers recommend that you have your Troy Bilt zero-turn mower parts inspected and replaced.
